![]() ![]() We used this parameter for the remaining cutting process of the press fit kit. With a cutting speed of 2.0 the entire processing area could be cut without any problems. This is due to the fact that it is far from the transmitter and the energy is attenuated. The lower right side of the processing area did not make the cut. We decided to double the cutting speed to 2.4. We started with the suggested sample settings from FabLab Kamakura for 3mm cardboard. We assume that the corrugating direction of the cardboard influences the fitting characteristics. Diagonal (45º) to the corrugated cardboard.Our plan was to cut the Kerf Check six times. If you want to cut at an angle, you need to tilt the SVG file itself. The form can be rotated 90 degrees, but it cannot be placed at an angle. The same material that will be used for the Press-Fit kits. The convention is to use Black for engraving and Red for cutting.Ĭharacterizing the laser cutter only works in combination with a material, we use 3mm corrugated cardboard for the characterization. Set the “Process (Skip, Cut, Engrave),” Power, and Speed for each color. Select “Create, modify, or clear material template. In the Laser Settings Menu (Laser & Wrench) you can define the cut/engraving colors as well as the power, speed and frequency settings for each color. This is useful if the design is too complex and would slow the computer down. The Eye Icon shows and hides the complete design. Clicking the ‘Connector’ Button on the bottom right establishes the connection to the laser cutter, after which the current xy position of the laser is also displayed in the workarea. Drag and drop the desired into the work area. On the right side, the recent print jobs are displayed, the most recent is on top. When a print job is sent, the TROTEC JobControlIR Application opens. That’s probably the best way to learn Kanji.) ![]() (Note Georg: As the FabLab is mainly used by Japanese Speaker, the UI Language is set to Japanese. Select Print from Inkscape and choose Trotec Engraver to see the options. ![]() #Inkscape laser cutter 96 windowsWe are using a dedicated Windows Laptop for the laser cutter and Inkscape to process and send. This can be changed in the TROTEC control panel. Convention dictates that the cut-line has to be red (255,0,0) and the engraving area needs to be black (0,0,0). The thickness of the cut line needs to be either 0.3pt or 0.001mm. The files gives you a 0.1 step change in the width of the cut-out size, allow you to check the snugness of two printed pieces. #Inkscape laser cutter 96 generatorWe choose to use the Kerf Check Parts Generator make by Daisuke Doyo during FabAcademy2018. The group assignment for this week is to characterize and understand the operation of the laser cutter. 4.Computer-Controlled Cutting # Background #Īt FabLab Kamakura we are using a TROTEC Speedy 100 laser cutter, with a max. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |